Upgrade Innovations DIT BOX MK4

 
We ship worldwide
Questions? Contact us
Best customer support
Individual Service
  • DitboxMK4
  • 1,00 € *

    inkl. MwSt. zzgl. Versandkosten

     
    Menge

    Lieferzeit ca. 5 Tage

     
      Upgrade Innovations DIT BOX MK4 Take your live grading and monitoring station... mehr
    Produktinformationen "Upgrade Innovations DIT BOX MK4"

     

    Upgrade Innovations DIT BOX MK4

    Take your live grading and monitoring station anywhere a camera can go.

    Take your live grading and monitoring station anywhere a camera can go.

     The DIT BOX is a collaborative design between credited Digital Imaging Technician, Chris Bolton, & Upgrade Innovations. The DIT BOX has a pull out machined internal frame that hard mounts the essential DIT components needed to do up to four camera live grading. For a list of the components, see below.

    The lightweight Pelican Air 1535 is modified with a rear back panel to accommodate 24 x Neutrik D-Series connectors and a 120mm silent fan. The DIT BOX is powered by a custom Cramped Attic 24 volt power distribution module with separate 20V and 12V kill switches and fan controller. With a primary and secondary 24V input, swap power inputs without components losing power.

    The modified Pelican case also features a removable top lid, removable BNC panel cover for transport and side and front mounted cheese plates with ARRI 3/8-16″ and SmallHD 1/4-20″ Pin-Loc patterns for mounting accessories.

     The Laptop Tray mounts to the DIT BOX laptop brackets to securely mount a 13″, 15″ or 16″ Macbook Pro. Optional accessories for the Laptop Tray are available for mounting to baby pin with a spigot adapter with our Quick Release VESA plate.

     The base of the DIT BOX features a bottom bracket for mounting the included non-twist spigot adapter, a Ronford Baker QR plate or the Upgrade Innovations QR VESA Plate. The DIT BOX base is equipped with longer feet to rest properly with a QRP plate mounted underneath.


    What comes in the DIT BOX

    • Modified Pelican Air 1535 with no foam
    • Machined Aluminum Inner Bracket Assembly
    • 1 x 5 port Ethernet Switch & 5x Ethernet cables
    • 1 x Sonnet Echo Express SE 1 (NEW)
    • 1 x Custom Enclosure for Sonnet Echo Express SE 1 for a Blackmagic PCIE Card (NEW)
    • 1 x Laptop Tray with 2 tie-down M6 Thumb Screws
    • 2 x Laptop clamps, 2x tie-down M6 Thumb Screws, 6x Spacer Plates
    • 1 x 24Volt 350 Watt Power Supply with AC cable
    • 1 x AC Power Supply Mounting Bracket (NEW)
    • 1 x 120mm Silent Fan & Fan Guards
    • 1 x DC Regulator and Distribution box with built in fan and 12V LEMO 0B Connectors (NEW)
    • 1 x AJA Kumo power cable, 1x Cal Digit power cable, 2 x power cables for two Box IO’s
    • 1 x Decimator power cable, 1 x Ethernet Switch power cable,  1x Sonnet PCIE card enclosure power cable 1 x open lead power cable
    • 3 x Small Cheese Plate with ARRI 3/8-16″ and SmallHD 1/4-20″ Pin-Loc mounting patterns (NEW)
    • 1 x Bottom Mounting Bracket
    • 4 x Delrin Feet
    • 1 x Non-Twist C-Stand/Spigot adapter
    • 1 x Rear cover plate for BNC and fan
    • 2 x BNC Label Plates
    • 1 x 24volt 6’ power extension cable
    • 1 x Removable Lid
    • Full set of video cable and BNC Neutrik connectors
    • Includes mounting screws for all components



    The DIT BOX hard mounts the following devices:

    • 2 to 3 x FSI BOX IO (not included)
    • 1 x AJA 32×32 or 16×16 router (not included)
    • 1 x Decimator Quad (not included)
    • 1 x Cal Digit TS3+ or TS4 (not included)
    • 1 x NetGear ProSafe GS105 (included)
    • 1 x Sonnet Echo Express 1 in custom bracketry (included)
    • 1 x Blackmagic Quad 2 or Duo 2 (not included)
    • 1 x Custom 24Volt AC distribution and regulator module (included)
    • 1 x 120mm silent fan (included)
    • 24 x Neutrik D-Series Connectors (included)

            Approx 44Ibs / 20kg with all devices installed