Teradek COLR Duo Real-Time wireless LUT box with camera control, dual 3G-SDI

COLR Duo is a wireless camera control bridge and 2 channel. LUT box, with support for 2 independent 33pt 3D LUTs. COLR Duo integrates with Pomfort LiveGrade Pro, allowing DITs and colorists to give everyone the right look.

During camera prep, on your cart, through color timing or on camera, COLR enables directors, ACs, and DITs to see what they need. Multiple presets, combining CDL and 3D LUTs, can be stored on the device for quick conversion or custom looks at the touch of a button. For even more control over the look of your footage, COLR Duo offers two fully configurable SDI outputs, allowing you to display two independent 33pt 3D LUTs or even the same LUT across two monitors.

COLR is integrated with Pomfort LiveGrade Pro, giving you fine control over your LUTS using WiFi, Ethernet, or USB. Each LUT can be sent to COLR and applied to your image immediately from within the application.

Whether your production requires industry standard color and gamma-accurate monitors or large consumer-grade screens, COLR is compatible. With SpectraCal’s CalMAN software, you can use the COLR and COLR Duo to calibrate a video display with a 10-bit 33pt 3D LUT. To learn more, visit the CalMAN Setup Guide.

With COLR as a piece of the puzzle, the Connected Set initiative encourages seamless integration between all Teradek products, ultimately streamlining on and off-set workflows. This will support a consistent workflow throughout the production process, whether on-set with zero delay transmission, iPad monitoring, or for off-site dailies review and final color grading. Stay ahead of the curve via free firmware upgrades and native integration with other Teradek products including Bolt, Cube, and LOKR.

FEATURES

• LUT Box (CDL 1D and 33-Point 3D LUTs)
• HDMI/SDI Cross-Converter
• Wireless Controller for Ethernet Cameras
• Supports 10-Bit Color
• Simultaneous HDMI and SDI Outputs
• Integrates with Pomfort LiveGrade Pro
• Supports Virtually Every Camera Signal
• Compatible with Virtually All Monitors
• Convert RAW & LOG Signals for Monitoring
• Part of Teradek Connected Set Workflow

TECHNICAL SPECS

General:

•  Video Inputs: 1x 3G/HD/SD-SDI
• Video Outputs: 2x 3G/HD/SD-SDI
• Color Sampling: 10-bit YCrCB 4:2:2
• Network Protocols: TCP/IP, UDP, HTTP, DHCP
• Software Or Platform Integration: Pomfort LiveGrade, SpectraCal CalMAN, and more
• Power Input: 2-pin Circular Locking Connector, 6-28V DC
• Power Consumption: 8W, 7W (no WiFi)
• Dimensions: 5,1 x 2,6 x 10,2cm / 2" x 1" x 4"
• Weight: 170g/6oz
• Mounting: 1x 1/4"-20 threaded hole

 Supported Resolutions

• 1080p 23.98/24/25/29.97/30/50/59.94
• 1080i 50/59.94/60
• 1080PsF 23.98/24/25
• 720p 50/59.94/60
• 480i59.94, 576i50

 Color Correction

• CDL/1024 1D LUT (supports 10-bit color)
• 33x33x33 3D LUT (supports 10-bit color)
• Supports 2 Video Outputs with 2 independent LUT Pipelines each

 Interface

• Http: Feature-rich web UI for configuration and control
• Switches: On/Off and Reset switch
• Expansion: 2x USB 3.0 Type-A
• Status LEDs: Multiple LEDs for device, wireless and network statuses

Network

• Ethernet: 10/100/1000BASE-T Gigabit
• WiFi: 2.4/5GHz 802.11 ac/a/b/g/n MiMO
• Rf Channel Selection: Auto with modes (2.4 or 5Ghz), Auto (2.4 GHz only) Auto (5Ghz only) and configurabel to specific channels

What's In The Box?

• 1x Teradek Colr Duo
• 1 x Power Supply Unit 2-pin Connector to 18W AC Adapter(Int) - 6 ft. Cable
• 2 x SDI - BNC to BNC Cable
• 2 x Antenna 2dBi WiFi 2.4/5.8 GHz
• 1 x Mini-USB to USB - 18 in. Cable
• 1 x Quickstart Guide - COLR
• 1 x Free Trial Code for Pomfort LiveGrade Pro