- Artikel-Nr.: 10-1955-2V
inkl. MwSt. zzgl. Versandkosten
Lieferzeit ca. 5 Tage
*This product is EOL - End of Life*
The Bolt LT takes Teradek’s industry-leading wireless performance and packages it into an affordable, streamlined series of zero-delay wireless video systems. The LT line is available in 500ft. or 1000ft. max-range models, with the LT 500 offering external antennas on the transmitter for enhanced wireless performance.
Not only lighter, but smaller too, the Bolt LT is the essential, no-frills high performance wireless video system. Each transmitter includes a single 3G-SDI or HDMI input with matching looping output, while the receiver includes a single 3G-SDI or HDMI output. Several ⅜” and ¼”-20 mounting points allow Bolt LT to mount seamlessly to any camera rig and integrated bi-directional Sony L-series or Canon LP-E6 pass-through battery plates allow you to power your system far more easily than before.
The Bolt LT also retains critical features from the previous generation, including AES 128 encryption to protect your video feed from prying eyes and multicasting to up to 4 receivers.
- Compatible with 3rd generation Bolt 1000, Bolt 1000 XT, Sidekick II, Sidekick XT and LT
- Compatible with smallHDs 703 Bolt and FOCUS Bolt Sidekick RX Monitors
- SDI loop out on TX
- External antennas on TX and RX
- Smaller and lighter chassis design with robust mounting points (3/8” and ¼”-20)
- Extremely affordable and offers the same wireless performance as the XT
- Range: 1000ft/ 305m
- Video Inputs: 3G/HD/SD-SDI
- Video Outputs: 3G/HD-SDI-SDI (1x Rx and 1x loop out on TX)
- SDI ancillary Data Support: Metadata, TC, start/stop flags from certain camera manafacturers
- Color Sampling: SDI: YCCr 4:2:2, 10bit (8bit when format conversion is enabled)
- Delay: <0.001sec
- Video Compression: visually lossless
- Power Input: 2-pin Connector 7-28 VDC
- Power Consuption: 7.5 Watts (TX) and 8.5 Watts (RX) (Measured at 1080p60)
- RF Channel Selection: Auto only (NOT configurable)
- Dimensions Transmitter: 10.2x 6.6x 2.4cm / 0.95" x 2.6" x 4.47"
- Dimensions Receiver: 11.4x 8.6x 2.5cm / 1.0" x 3.4" x 4.5"
- Weight: Transmitter: 226g / 8oz.
- Weight: Receiver: 288g / 10.1oz
- Multiple mounting options with M3 and 1/4" holes
- 1080p 23.98/24/25/29.97/30/50/59.94/60
- 480p59.94/576p50 (via HDMI ports only)
- CDL/1024 1D LUT (supports 10bit color)
- 33x33x33 3D LUT (supports 10bit color)
Wireless Non-DFS Frequencies:
- US: 5.19 ~ 5.23 GHz and 5.755 ~ 5.795 GHz
- EU & JP: 5.19 ~ 5.23 GHz
Wireless DFS Frequencies:
- US: 5.27 ~ 5.55 GHz and 5.67 GHz
- EU & JP: 5.27 ~ 5.67 GHz
What's In The Box?
- 1 x Teradek Bolt LT 1000 Transmitter
- 2 x Teradek Bolt LT 1000 Receiver
- 12 x Antenna 2dBi WiFi 2.4/5.8 GHz
- 3 x 2-pin Connector to PowerTap 18 inch Cable
- 2 x PSU 2-Pin Connector to 18W AC Adapter 6ft cable
- 3 x SDI (BNC to BNC) Cable 10 inch
- 3 x USB 2.0 Cable (A-Male to Mini-B)
- 1 x Hot Shoe Adapter (1/4"-20 inch)
- 1 x Lightstand Adapter (1/4"-20 inch)
- 1 x Protective SKB Case - military-standard waterproof hard case with custom foam (13.5in x 9.5in x 6.5in - 34.29cm x 24.13cm x 16.51cm)
- 2 x Wooden Camera Ultra Arm Mini Monitor Mount (1/4-20 to 1/4-20) with Arm Ball (3/8-16)
- 2 x Wooden Camera NATO Lock Kit
- 1 x Teradek Vinyl Zipper Bag 250x150mm
- 1 x Hex L Key 2.5 mm size 3-5/6 inch length
- 1 x Hex L key 3/16inch x 2 13/16inch length
- 2 x factory-installed V Mount (female) Battery Plate 14.4V for RXs